 |
Check foundation walls and floors for cracking, heaving, spalling, deterioration, or efflorescence |
|
Check chimney for loose, deteriorated or missing mortar and bricks |
|
Check grading for proper slope away from foundation |
|
Check basement and crawlspace for moisture or leaks |
|
Check all wood surfaces for weathering and paint failure |
|
Check all decks, patios, porches, stairs and railings for deterioration |
|
Cut back and trim all vegetation from structure |
|
Check for any missing, loose or damaged shingles |
|
Check for open seams, blisters, or bald areas on flat roofs |
|
Clean gutters, strainers, and downspouts – make sure downspouts divert water away from the foundation |
|
Check the attic for any evidence of leaks or vermin activity |
|
Trim back all tree limbs and vegetation away from the roof |
|
Check fascia and soffits for deterioration and damage |
|
Check for loose or missing glazing putty |
|
Check caulking for deterioration at the openings and joints between dissimilar materials (wood and masonry) |
|
Check for broken glass and damaged/missing screens |
|
Check all window and door hardware |
G
|
Check all faucets, hose bibs, and supply valves for leakage |
|
Check for evidence of leaks around and under sinks, showers, toilets, and tubs |
|
Check all tile joints for adequate grout |
|
Check lawn sprinkler system for leaky valves and exposed lines |
|
Have the septic tank cleaned every two years |
|
Have well water checked for quality |
|
Check the main water shut-off valve for operation and leakage |
|
Checked exposed wiring and cable |
|
Check all lamp cords, extension chords, and receptacles for wear |
|
Trip circuit breakers and ground fault circuit interrupters (GFCI) monthly to ensure proper function |
|
Learn location of electrical service panels and label each circuit |
|
If fuses blow, circuit breakers trip frequently, or any appliance sparks or shorts out, contact a licensed electrician for repairs |
|
Clean or change furnace filter every three months of operation |
|
Lubricate fan and motor bearings (only where indicated) |
|
Check fan belt tension and listen for unusual noises |
|
Keep area around heating and cooling equipment clear |
|
For boiler systems, check water level and valves for leakage |
|
Have system serviced annually (prior to the start of the season) |
|
Check ceiling and surfaces around windows for evidence of moisture |
|
Check caulking around showers, bathtubs, sinks, and toilet bases |
|
Check ceiling areas beneath bathroom for leakage |
|
Check all stairs and railings for any loose members |
|
Check all fire and safety systems regularly |
|
Test all smoke and CO detectors regularly |
|
Know the location of all gas shut-off valves |
|
